Arabella Grey Queen Boucle Upholstered Wingback Shelter Bed

Step 1: Assemble the Headboard and Footboard-Attach Legs: Secure the legs to the headboard and footboard using the provided bolts, washers, and Allen key. Tighten securely. Position Legs: Ensure the legs are correctly aligned and stable. Step 2: Attach Side Rails -Connect Rails to Headboard and Footboard: Using the included bolts and washers, attach the side rails to the headboard and footboard. Align them properly and tighten the connections. Step 3: Install Center Slat Support -Place Center Support: Position the center slat support bar between the side rails. Secure with Hardware: Use the provided clips and hardware to attach the center support securely to the side rails. Step 4: Attach Slats- Lay Slats Across the Frame: Evenly distribute the slats across the bed frame, ensuring they fit into the designated slots. Secure Slats with Clips: Use the slat clips to fix the slats into place on the side rails and center support. This will provide a firm mattress base. Step 5: Adjust Levelers Level the Bed: Adjust the levelers on the legs to ensure the bed is stable. Turn the levelers counter-clockwise to extend or clockwise to retract. Ensure equal pressure is applied on all legs. Special Instructions for Adjustable Mattress Base: Remove Cleats: If using an adjustable mattress base, follow the supplementary instructions to remove the side rail cleats. This step is essential to accommodate the base and ensure proper installation.