Robin King Wood Platform Bed

Attach Side Rails to Headboard: Position the headboard and attach the side rails using the M8x40 Allen bolts, flat washers, and spring washers. Tighten with the Allen key. Attach Footboard: Connect the footboard to the side rails using the remaining M8x40 Allen bolts, flat washers, and spring washers. Ensure all connections are secure. Install Center Slat Support: Position the center slat support and attach the support legs using the M8x90 Allen bolts. Secure tightly with the Allen key. Place Slat Roll: Unroll the slats and position them on the side rails and center support. Secure the slats using the wood screws. Adjusting the Levelers: Position the Bed: Place the bed in your desired location. Locate the levelers under each support leg. Adjust Levelers: Turn the leveler counter-clockwise to extend and clockwise to retract. Adjust each leveler until all support legs apply equal upward pressure on the slats. Maintenance Instructions: Moving the Bed: Remove the mattress and box spring (if applicable) before moving. Lift the bed to move; do not drag it to avoid damaging the support legs. After moving the bed, re-adjust the levelers to ensure stability.

Dust frequently with a clean, damp, lint-free cloth. Frequent dusting will remove abrasive build-up which can damage a finish over time. Occasionally use a light application of a high quality furniture polish to enhance the beauty of the finish. Avoid using oily polishes or waxes. Avoid exposing your furniture to strong sunlight. Prolonged exposure to direct sunlight can fade the finish of your furniture. Do not expose your furniture to any liquids. Never allow water to sit on your furniture. Alcohol, nail polish and perfume are also dangerous, as they can dissolve the furniture finish on contact and may require professional repairs.